[Home ] [Archive]    
:: Main :: About :: Current Issue :: Archive :: Search :: Submit :: Contact ::
:: Volume 10, Issue 2 (9-2012) ::
Int J Radiat Res 2012, 10(2): 95-98 Back to browse issues page
Measurements of output factors using different ionization chambers and build up caps
A. Iftikhar
, iahmadmp@gmail.com
Abstract:   (6376 Views)
Background: The aim of this work was to study the output factors for Linac using different ionization chambers and build up caps. Materials and Methods: Output factors were measured for open square fields (3 × 3 cm to 40 × 40 cm) defined by collimator jaws for 6 and 15 MV photon beams from a Varian Clinac 2100C accelerator were measured. The measurements in air were performed using Compact Cylindrical and Farmer type ionization chamber fitted with acrylic and brass build up caps. All measurements were taken with the detector set with its central axis perpendicular to the beam central axis and isocentrically positioned at the reference depth in empty water phantom. Results and Discussion: It was observed that out put factors increased with field size for both 6 and 15 MV photon beams. The increase in output factor is less prominent for brass build-up caps than acrylic build up caps. Up to 1.53% and 0.97 % difference were observed between 6 and 15 MV energies for acrylic and brass build up caps respectively. For acrylic build up cap, no significant difference was found for both ionization chambers. However, measurements for brass and acrylic build up caps with same ion chamber differ by up to 4.4 % for 15 MV energy. Conclusions: The measurement of output factors Shwith cylindrical build-up cap made of high Z material distorts Shand should be avoided. The use of buildup caps with Zeff close to that of water such as acrylic is a good choice. Ionization chamber is the best choice for Sh measurements for large field sizes. Iran. J. Radiat. Res., 2012 10(2): 95‐98
Keywords: Output factors, build up caps, ionization chamber
Full-Text [PDF 185 kb]   (5255 Downloads)    
Type of Study: Original Research | Subject: Radiation Biology
Send email to the article author

Add your comments about this article
Your username or Email:

CAPTCHA


XML     Print


Download citation:
BibTeX | RIS | EndNote | Medlars | ProCite | Reference Manager | RefWorks
Send citation to:

Iftikhar A. Measurements of output factors using different ionization chambers and build up caps. Int J Radiat Res. 2012; 10 (2) :95-98
URL: http://ijrr.com/article-1-941-en.html


Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Volume 10, Issue 2 (9-2012) Back to browse issues page
International Journal of Radiation Research
Persian site map - English site map - Created in 0.04 seconds with 32 queries by YEKTAWEB 4341